Training of acceptance criteria for electronic assembly according to ANSI/IPC-A-610 is very much suitable for all workers from assembly, repair, QC, for process engineers, designers, and chiefs of assembly dept., procurement and sales dept. The task of the training is to understand the meaning of the individual acceptance criteria. For that, the student should have at least minimal knowledge of the process. In order to improve such knowledge, we add some basic theory of soldering, explain structure of solder joint, its strain in the assembly life and main factors and factors which have influence on fatigue of solder joint.
The standard consists of 9 modules, which include the complete topics of acceptance. One training is for maximal 15 persons in the class.
Module 1 (2.5 hrs) - Introduction, IPC, professional policies and procedures
Module 2 (1 hr) - Foreword, Applicable Documents, Handling with assemblies
Module 3 (1.5 hr) - Hardware installation
Module 4 (1 hr) - Soldering
Module 5 (2 hrs) - Terminal connections
Module 6 (3 hrs) - Through hole Technology, Jumper wires for THT
Module 7 (3 hrs) - Surface mount technology, Jumper wires for SMT
Module 8 (2 hrs) - Component damage, PCB failures, other processes for finished PCBA
Module 9 (0.5 hr) - Solderless wire wrap
Complete Classification test from all modules (6 hrs)
The test is done from randomly selected questions by checking one of four possible answers. Each student receives his own combination of questions. Modules 1 and 2 are tested with closed book, all other modules are tested with open book. Students must get over 70% of good answers in all modules, to be qualified to get an official IPC certificate with registration number and 2 year validity.
Training terms for IPC 610 in 2019
March / 6.3. - 8.3. 2019
June / 5.6. - 7.6. 2019
September / 25.9. - 27.9. 2019
November / 27.11. - 29.11. 2019